Warning:  This Part Requires  General Mechanical Abilities   If you are not confident in your abilities Please have this product installed at a Local Off-Road Shop .  

Step 1:

Take an inventory of your parts, If you are missing any parts Please contact Artec Industries Immediately @ (855) 278-3299  M-F 8:30am-5pm MST if it is after those hours please email us pictures of what you received , along with product labels on the box and packing slip at Sales@artecindustries.com

 Step 2:

Place Part's 3 and 4    into the keyed slot on part number 2    (the 3's will go on the outside and 4's will go on the inside if of part 2)   the edges of the brackets should line up.

 Step 3:

insert your link in-between parts 3 and 4  use a bolt and nut to secure them .  Once they are secure place part 1 on top of the tabs for parts 3 and 4 .

 Step 4:

Tack weld all of the brackets together  Then remove the joints .

 Step 5:

Place the bracket onto your Cross member in your desired position and tack weld it into positon

 Step 6:

Fully weld the bracket together and onto the cross member

 Step 7:

Prime and paint the bracket.